|
Factory Installation
Factory Installation is available to provide the
expertise to assure proper set up and training. |
| _______________________________________________________________________ |
|
 |
Air Dryer
If the source of compressed air is not totally dry and
clean, we encourage using an onboard air dryer to protect the electronic valves and cylinders. |
| _______________________________________________________________________ |
|
 |
Optional Case Range
Interpack can quote on modifying the operating
range from our published standard. |
| _______________________________________________________________________ |
|
 |
Extended Hopper
If the 48” capacity is not sufficient, we can provide a larger capacity. Cost is quoted by 12” increments. |
| _______________________________________________________________________ |
|
 |
Mirror Image Footprint
If your product flow is different from our standard, the erector footprint can be reversed. Remember, the corrugated footprint must comply with the machine footprint.
|
| _______________________________________________________________________ |
|
 |
Special Electrics
From NEMA 4 wash down to specific PLC’s to 440 Volt/ 3 phase electrics, we can tailor the erector to your application.
|
| _______________________________________________________________________ |
|
 |
Specific Brand of PLC
Our standard for case erectors is Mitsubishi. We can quote on any other common brand. |
| _______________________________________________________________________ |
|
 |
3” Wide Upgrade and Spare Tape Heads
Upgrade to a 3” wide tape head for an extra measure security and closure strength. (3” wide tape heads increase minimum case width by 1”)
Also, a complement to any case erector should be a spare taping head. It assures minimum downtime due to tape roll change or maintenance. |